Used in joints and over screw fixings on Litex Membrane Board. Particularly suitable where small-format tiles are to be installed.
Use with Litex Membrane Board:
Like Litex Membrane Board Tape, Litex Membrane Sheet Tape can be applied to board joints and over screw fixings on walls to seal Litex Membrane Boards. Important during installation: Room and tape temperature >15 °C. Make sure the substrate is free of dust (if there is dust, wipe the surfaces with a cloth and undiluted primer). Use the Litex Mounting Roller to remove air bubbles and loose edges.
If Litex Membrane Sheet Tape is used, all crossing tape joints, and all overlaps on the tape or sealing details, must be sealed additionally with Litex 2-Component Adhesive or Litex Mounting Adhesive. Apply it in a width and length that covers the joint/overlap by at least 2 cm at each end.
An alternative product is Litex Membrane Board Tape, which can be cross-jointed without the use of other products
NOBB no.:
51710052
Related products

Litex Mounting Adhesive
